Project Brief:

With a waterproofing system required to protect the concrete deck above the flats, a selection of cold-applied products were provided by Proteus Waterproofing that met the client’s requirements.  The specialist contractor worked with Proteus Waterproofing on a specification which included the Cold Melt® inverted waterproofing system, Proteus Pro-Therm XPS and finished with a Proteus Pro-Living® green roof.

Key Requirement: Fast, hassle-free application

The 500m2 Cold Melt® insulated Pro-Living® roof system was selected by the client and contractor for its ease of installation, cold application and all-round green credentials.  After the pre-cast concrete roofing panels were craned into position, the joints were made good ready to accept the Cold Melt® inverted roofing waterproofing system. The inverted roof system incorporated Cold Melt® and Proteus Pro Therm XPS 150mm insulation. A Proteus Low-K Membrane was then applied prior to the application of the Pro-Living® green roof to complete the system build-up.

Key Requirements: Quality control                                                  

Proteus Waterproofing worked in close partnership with the Contractor to successfully deliver the project to a very high standard within the required timeframe.

Key Requirement: Long term performance

Incorporating recycled rubber-crumb and other organically grown products, Cold Melt® creates an elastomeric, seamless, cold-applied membrane and can outlast the lifetime of the substrate on which it is installed.

 

.

.